Blog

How to Safely Tighten Truck Lug Nuts?

It’s important for truck owners to know basic wheel maintenance. A punctured tire is a common issue truck drivers have to deal with. If you don’t know how to tighten or loosen lug nuts, it can make the issue more challenging to deal with.

Unscrewing and screwing a nut of a truck does not involve much skill; however, when the tire of a truck punctures, you may need these steps and tips to tighten the lug nuts. And here, that’s why we discuss; following are some useful steps and tips to follow while tightening truck lug nuts.

•It is typical for the stud to be stretched or loosened while mounting wheels on a hub, and therefore, it is important to not over-torque the nuts, since it could break. Contamination between wheels could compress which gets rid of the tension in the clamping system. Be sure to mount the wheels the right ‘Goldilocks’ amount.

•The hub and wheel faces must be clean, and should be free of contamination. A polished wheel is the easiest wheel to tighten truck lug nuts on.

•Always apply lubricant, as it minimizes corrosion build-up between the wheel and hub, which eventually makes removal easier.

•Position the pilot pads and lift the wheel to the pilot.

•Either a hand tightens the nut or uses a low-torque nut runner. Lower the truck from the jack and tighten. Do not use a high-torque impact wrench for the final torque.

The Squirrel takes the guessing out of lug nut safety. The Squirrel wheel safety device is designed to prevent lug nuts from becoming loose.

Visit here for more information https://goo.gl/XLb7kU

Copyright © 2018 Vischeck.net. All Rights Reserved.

Inforlinx