Category: blog

How to Safely Tighten Truck Lug Nuts?

It’s important for truck owners to know basic wheel maintenance. A punctured tire is a common issue truck drivers have to deal with. If you don’t know how to tighten or loosen lug nuts, it can make the issue more challenging to deal with.

Unscrewing and screwing a nut of a truck does not involve much skill; however, when the tire of a truck punctures, you may need these steps and tips to tighten the lug nuts. And here, that’s why we discuss; following are some useful steps and tips to follow while tightening truck lug nuts.

•It is typical for the stud to be stretched or loosened while mounting wheels on a hub, and therefore, it is important to not over-torque the nuts, since it could break. Contamination between wheels could compress which gets rid of the tension in the clamping system. Be sure to mount the wheels the right ‘Goldilocks’ amount.

•The hub and wheel faces must be clean, and should be free of contamination. A polished wheel is the easiest wheel to tighten truck lug nuts on.

•Always apply lubricant, as it minimizes corrosion build-up between the wheel and hub, which eventually makes removal easier.

•Position the pilot pads and lift the wheel to the pilot.

•Either a hand tightens the nut or uses a low-torque nut runner. Lower the truck from the jack and tighten. Do not use a high-torque impact wrench for the final torque.

The Squirrel takes the guessing out of lug nut safety. The Squirrel wheel safety device is designed to prevent lug nuts from becoming loose.

Visit here for more information https://goo.gl/XLb7kU

6 Truck Wheel Maintenance Tips

Good maintenance is crucial for a functional fleet. Without proper maintenance, a vehicle is more likely to malfunction. If not fixed, this can snowball into serious problems that empty your wallet and lead to accidents.

Maintenance requirements of different vehicles vary; for instance, for a truck, after the engine block, the most crucial part that requires constant maintenance is wheels and auxiliary parts. If the body of the rig is in good shape but the wheels are in poor shape, the entire rig may be useless.

Wheel maintenance is a crucial component to taking care of your fleet. Here are 6 tips to maintain your wheels for many safe journeys ahead.

1. A dirty wheel can hide rim damage entirely, and thus, keeping your wheels polished is recommended widely, since it exposes any damage underneath, which may have happened on the road.

2. Polishing can also expose holes and cracks on bolts. Polishing can be a difference between a safe ride and a dodgy rig with bolt hole cracks.

3. Checking the tire inflation levels can save many accidents. Ensure tires neither are over nor under inflated.

4. DOT stamps are important for maintenance, and therefore, be sure that the DOT stamp is present and ensure never to sand it off.

5. Always tighten nuts. One can make sure wheel nuts stay on with our Squirrel wheel safety device.

6. Install wheels back properly. When remounting wheels on the truck, always be sure to follow industry standards to put them back on correctly.

The 6 tips can help you avoid any accident involving wheels. Before embarking on a long haul, follow these tips diligently to ensure your safety and your payload.

To Know more visit here https://goo.gl/TXsQHS

VIS-Polish vs. VIS-Shine: Which One Suits You Better?

VIS offers 2 main pieces of truck wheel polishing equipment, the VIS-Shine and the VIS-Polish. Many of our customers wonder which one will be a better fit for them. We’re here to explore which unit could be ideal for you.

Choosing the right polishing unit for your truck(s) is important. Ask yourself questions like how many wheels do you need to or have the potential to polish, and how often will you be using the polishing unit. Whether you are polishing just your truck’s wheels or entire fleets, you will find value in our equipment, as long as you invest in the right units.

Here is the explanation of the differences between VIS-Polish and the VIS-Shine to help you make the right decision.

• The VIS-Polish is an automated unit and does not need attention until the wheel or consumables need to be changed out.

• Anyone can operate the VIS-Polish easily. The design is user-friendly, and thus, does not need knowledge of the polishing—it is designed in such a way that even children as young as 12 can operate. However, the VIS-Shine needs someone with polishing knowledge to operate it.

• The Vis-Polish has a sanding option to bring back wheels that are road weary. The VIS-Shine maintains a wheel when it is polished and in good shape.

• The VIS-Polish is a great machine for someone that has a steady supply of wheels to polish. The VIS-Shine is more of a maintenance tool that can be a good option for an owner-operator or small fleets with fewer wheels to maintain.

All these are the main difference. However, we recommend a conversation with a VIS representative today to see if the VIS-Polish or VIS-Shine would be a good fit for you!

To Know more visit here https://goo.gl/L9SPcR

Copyright © 2018 Vischeck.net. All Rights Reserved.

Inforlinx